canyon components logo

PRODUCER GAS Chemical compatibility with O-rings, rubbers, & plastics

Producer Gas is a type of fuel gas that is produced by the partial combustion of carbonaceous materials, such as coal, biomass, or municipal waste, in an oxygen-limited environment. It typically contains a mixture of carbon monoxide (CO), hydrogen (H2), methane (CH4), and nitrogen (N2), along with small amounts of other gases. Producer Gas is used as a fuel for internal combustion engines, industrial furnaces, and gas turbines, providing an efficient and cost-effective alternative to natural gas and other conventional fuels. The production of Producer Gas involves the gasification process, where the feedstock is heated in a gasifier to produce the desired gas mixture. This process offers the advantage of utilizing low-grade and waste materials, contributing to resource efficiency and waste reduction. Additionally, Producer Gas can be further processed to produce synthetic natural gas (SNG) or used as a precursor for chemical synthesis.

Need PRODUCER GAS resistant plastics, O-rings, rubbers, and seals? Get in touch now!


Canyon Components strives to meet all customer service requests. If you need something that isn't listed below, feel free to contact a Canyon Components product and application consultant and let our knowledgeable staff help you design the perfect part for your needs.

Paint covered o-ring
MaterialPerformanceGet a quote
FFKM (CanRez™, Kalrez®, Chemraz®)Excellent: <15% SwellingGet a quote
FKM ETP (Viton® Extreme)Excellent: <15% SwellingGet a quote
FKM (Viton®)Excellent: <15% SwellingGet a quote
NBR (Buna-N, Nitrile)Excellent: <15% SwellingGet a quote
HNBR (Hydrogenated Nitrile)Excellent: <15% SwellingGet a quote
EPDM (Ethylene Propylene)Not Recommended: Over 40% SwellingGet a quote
Aflas® (TFE/P, FEPM)Excellent: <15% SwellingGet a quote
Silicone (VMQ, PVMQ)Acceptable: <15-25% SwellingGet a quote
Fluorosilicone (FVMQ)Acceptable: <15-25% SwellingGet a quote
Polyurethane (PU, AU)Excellent: <15% SwellingGet a quote
Teflon® (PTFE)Acceptable: <15-25% SwellingGet a quote
Neoprene (Chloroprene)Acceptable: <15-25% SwellingGet a quote
SBR (Styrene-Butadiene)Not Recommended: Over 40% SwellingGet a quote
ACM (Acrylic Rubber)Acceptable: <15-25% SwellingGet a quote
Butyl (IIR, Isobutylene Isoprene)Not Recommended: Over 40% SwellingGet a quote
Butadiene Rubber (BR)Not Recommended: Over 40% SwellingGet a quote
Isoprene Rubber (Polyisoprene)Not Recommended: Over 40% SwellingGet a quote
Natural Rubber (NR)Not Recommended: Over 40% SwellingGet a quote
Hypalon (CSPE)Acceptable: <15-25% SwellingGet a quote
Metal Piston

Get a quote now!

Groove Design References

Learn More

Coatings, Packaging, & Other Services

Learn More

Custom Parts & Custom O-rings

Learn More