STEAM, 400° - 500°F Chemical compatibility with O-rings, rubbers, & plastics
Steam at temperatures between 400°F and 500°F is commonly referred to as medium-pressure steam and is used in various industrial and chemical applications for heating, power generation, and sterilization. It is produced by heating water to a temperature above its boiling point, causing it to evaporate and form steam. Medium-pressure steam is widely used in power plants to drive turbines and generate electricity, in industrial processes for heating and sterilization, and in the chemical industry for various reactions. Proper handling and control of medium-pressure steam are essential to prevent accidents and ensure safety, as it can cause burns, scalds, and explosions if not properly managed. Safety measures, including the use of appropriate protective equipment and adherence to handling protocols, are crucial when working with medium-pressure steam. Its versatility and effectiveness in providing heat and power make medium-pressure steam a valuable resource in various industrial and chemical applications, although its use requires careful control to prevent hazards.
Need STEAM, 400° - 500°F resistant plastics, O-rings, rubbers, and seals? Get in touch now!
Canyon Components strives to meet all customer service requests. If you need something that isn't listed below, feel free to contact a Canyon Components product and application consultant and let our knowledgeable staff help you design the perfect part for your needs.
| Material | Performance | Get a quote |
|---|---|---|
| FFKM (CanRez™, Kalrez®, Chemraz®) | Excellent: <15% Swelling | Get a quote |
| FKM ETP (Viton® Extreme) | Excellent: <15% Swelling | Get a quote |
| FKM (Viton®) | Not Recommended: Over 40% Swelling | Get a quote |
| NBR (Buna-N, Nitrile) | Not Recommended: Over 40% Swelling | Get a quote |
| HNBR (Hydrogenated Nitrile) | Not Recommended: Over 40% Swelling | Get a quote |
| EPDM (Ethylene Propylene) | Poor: 25-40% Swelling | Get a quote |
| Aflas® (TFE/P, FEPM) | --- Insufficient Testing Data | Get a quote |
| Silicone (VMQ, PVMQ) | Not Recommended: Over 40% Swelling | Get a quote |
| Fluorosilicone (FVMQ) | Not Recommended: Over 40% Swelling | Get a quote |
| Polyurethane (PU, AU) | Not Recommended: Over 40% Swelling | Get a quote |
| Teflon® (PTFE) | --- Insufficient Testing Data | Get a quote |
| Neoprene (Chloroprene) | Not Recommended: Over 40% Swelling | Get a quote |
| SBR (Styrene-Butadiene) | Not Recommended: Over 40% Swelling | Get a quote |
| ACM (Acrylic Rubber) | Not Recommended: Over 40% Swelling | Get a quote |
| Butyl (IIR, Isobutylene Isoprene) | Not Recommended: Over 40% Swelling | Get a quote |
| Butadiene Rubber (BR) | Not Recommended: Over 40% Swelling | Get a quote |
| Isoprene Rubber (Polyisoprene) | Not Recommended: Over 40% Swelling | Get a quote |
| Natural Rubber (NR) | Not Recommended: Over 40% Swelling | Get a quote |
| Hypalon (CSPE) | Not Recommended: Over 40% Swelling | Get a quote |
Get a quote now!
Groove Design References
Learn More
Coatings, Packaging, & Other Services
Learn More
Custom Parts & Custom O-rings
Learn More